Can MAXEasy be used in a Foam Cannon?Updated 2 months ago

Foam Cannon Application Instructions for MAXEasy:

1. Use as is, do not dilute. MAXL bottle may fit some foam cannons. Bottle may not fully seat.
2. Set the Output Dial: Adjust the foam cannon's output dial to maximum concentration to prevent over-diluting MAXEasy.
3. Apply MAXEasy: Use the foam cannon to apply MAXEasy in quick, sweeping bursts, covering large areas efficiently. Remember, MAXEasy does not produce foam. Apply just enough to lightly coat the surface. If you notice any streaking from heavy application, promptly wipe it off with a damp microfiber towel to maintain a smooth finish. Avoid letting excess product dry on the surface.
4. Rinse Thoroughly: Start rinsing from the bottom up to effectively spread MAXEasy while rinsing it off.
5. Dry Immediately: Use the MAXL SoftSorb Drying Towel to dry the car. While drying, inspect the surface for any excess product. Use the damp towel to smooth out any streaking, hazing, or other marks caused by excess product.

Cure Time: Allow MAXEasy 24 - 48 hours to achieve peak performance and chemical resistance. Hydrophobicity will drastically increase over this period of time. Extended exposure to direct sunlight will also increase hydrophobicity, especially on glass.