How to use the MAXL SoftSorb Drying TowelUpdated 2 months ago

Dry with MAXL SoftSorb Drying Towel

1. After thoroughly rinsing off MAXEasy, immediately dry the car.
2. (Optional) You can use a leaf blower to quickly remove bulk water from large surfaces, cracks, mirrors, wheels, etc. Do not spend too much time with the blower. The real drying power is with the SoftSorb drying towel.
3. Use the MAXL SoftSorb Drying Towel to finish drying. This towel absorbs water instantly and can dry an entire car without scratching.
4. While drying, look for areas where there may be excess product still on the surface and smooth those out as you go. Avoid using a chamois, as it will cause smears, streaking, and possible scratches.

General Tips:

• Always use a cool surface and avoid direct sunlight to prevent products from drying prematurely.
• Use minimal pressure with soft microfiber towels to avoid scratching.
• Remember to open doors and clean door jambs and dry them.
• Be sure to lift the wiper blades and dry them.
• Regular use of MAXEasy maintains a brilliant shine and protective hydrophobic surface.
• MAXEasy needs 24-48 hours to reach peak hydrophobic performance and chemical resistance.

Do not apply pressure when drying a delicate surface. Let the SoftSorb technology and weight of the towel do the work as you blot or lightly pull the towel across the surface.

When dragging or pulling the MAXL SoftSorb towel across the surface, it is best practice to pull the towel from front to back. This direction is the same as the natural airflow over your vehicle while driving. Try to avoid pulling the towel crossways, if possible.