MAXL ONE DirectionsUpdated 14 days ago

MAXL ONE is super easy to use. For the first application, if you haven't previously used our other product MAXEasy on your vehicle, you will need to give it a good wash with a pH-neutral soap such as MAXWash and dry it. We recommend using the MAXL SoftSorb Drying Towel, as it’s the best drying towel in the world to dry quickly and easily without scratching. After that, all you do is spray MAXL ONE on and wipe it off. A little goes a long way, so you should only need about 2oz per vehicle. Use one microfiber towel as your application "buff on" towel, then use a separate clean, dry microfiber towel to "buff off." It works on practically EVERYTHING, making it super easy to make every surface on your vehicle look new again!

When using MAXL ONE to clean your ride, make sure to have multiple towels because you will want to replace dirty, soiled towels with fresh, clean ones as you wipe the vehicle clean. This makes it super easy. MAXL ONE has more lubricity than most car shampoos, which drastically reduces the chances of marring and scratching.

If you accidentally use too much and find yourself having to wipe more than you like, just use a damp microfiber towel to quickly and easily wipe it away—it’s super easy!

If you feel your vehicle is too dirty, wash it first. Afterward, use MAXEasy Coat & Rinse or MAXL ONE to coat it so it will repel dirt and collect less grime, making it much easier to clean next time.

We recommend using the MAXL Method Complete System for best results.

Directions on Bottle Label

DIRECTIONS: Apply to a cool surface out of direct sunlight. Do not let dry on surface before wiping off. Test on a small hidden area to ensure compatibility. SHAKE WELL BEFORE USE.

Waterless Wash, Quick Detailer, or Sealant Application (Dry Surface):

Spray product onto surface and a microfiber towel. Wipe onto surface, then flip towel to hand buff. Use a second clean dry microfiber towel to hand buff to a perfect finish.

Drying Aid (Wet Surface):

Spray product onto a drying towel and apply 1-2 sprays per panel, then dry the surface.

Tires:

Clean and dry the tire. Spray product onto an applicator or towel and onto tire. Wipe onto surface and work product back and forth to level evenly across the surface as well as into treads, lettering, and tire details. Allow to dry for 10-15 minutes. Multiple applications will produce more sheen to the matte finish. Wipe off excess to prevent sling.

Tips:

Use a soft microfiber towel and apply minimal pressure to prevent scratching delicate surfaces. Safe for all surfaces and compatible with window tints. Allow 1 hour before getting wet. Allow 24-48 hours to fully cure for maximum hydrophobic performance and chemical resistance.

Dilution:

Using a dilution bottle, such as the MAXL Dilution Bottle, mix 50% distilled or DI (deionized) water with 50% of product and shake thoroughly for 60 seconds.

Warnings:

May cause eye irritation. Wash skin thoroughly after handling. Wear eye/face protection. Do not eat, drink, or smoke when using this product. IF SWALLOWED: Rinse mouth with water. Call a doctor and seek medical attention. KEEP OUT OF REACH OF CHILDREN