MAXWash Instructions and Dilution RatiosUpdated 12 days ago

Apply MAXWash to a cool surface, and do not apply in direct sunlight. Never allow product to dry on the surface. If drying occurs, mist more product or water occasionally on surface to rewet.

1. Mix product to desired ratio according to the dilution chart below. 
2. Pre-rinse the surface with water. Spray MAXWash onto the surface. Apply liberally to difficult areas such as bug splatter, excessive road grime, etc. Allow product to soak 2-5 minutes on surface to allow it to work itself into stains, dirt, and debris. Multiple treatments may be required for heavily soiled areas.
3. Spray MAXWash onto wash media such as the MAXL YellowCell Hypersoft Wash Sponge or a soft wet microfiber towel, then hand wash surface to mechanically dislodge the heavier stains and dirt off of the surface you are cleaning. Rinse microfiber cloth and/or wash sponge frequently to prevent excessive build-up of grime that can potentially mar or scratch the surface.
4. Rinse off thoroughly with water until all sudsing has been removed.
5. Dry the surface using air blower or a soft towel to reduce chances of water spots, marring, and scratches. MAXWash works best when used after pre-rinsing with MAXRemove to remove abrasives. MAXWash can be used in a foam cannon and the MAXL bottle is designed to fit popular foam cannons (bottle will not fully seat).

MAXWash Dilution Ratios (use a dilution bottle such as the MAXL Dilution Bottle):

*Ratios: Add water first, then add MAXWash. For example, 4:1 means add 4 parts water to the dilution bottle until it reaches the “4:1” mark, then add 1 part MAXWash and fill to the “fill line” marked on the dilution bottle.