MAXL RESMOOTH™ Clay, Bug, & Prep / Decon Towel
How do I use the RESMOOTH towel?
Step 1) Wash & RinseWash and rinse the surface thoroughly before you start. Never clay a dirty surface — loose grit will scratch the paint. First time using RESMOOTH? Break it in on your windshield first: spray lubricant on the glass and the towel, g
Will this scratch my paint?
No, not as long as you keep the surface and towel wet throughout. RESMOOTH works by gliding across a lubricated surface, lifting contaminants without digging in. Never use it dry, never use it on a dirty surface, and always use hand weight only — no
What does MAXL RESMOOTH remove from a vehicle?
RESMOOTH removes bonded surface contaminants that washing alone can't get off — including paint overspray and mist, bug residue after pre-treating and washing, tar and asphalt specks, brake dust and rail dust dots, light tree-sap mist and pollen film
How often should I clay my car?
For most daily drivers, 1–2 times per year is enough. A good rule: run your hand across a clean, dry panel. If it feels rough or gritty like sandpaper, it's time to clay. You should also always decon before applying any wax, sealant, or coating — eve
Is RESMOOTH safe on a new car?
Yes and new cars often need it most. During shipping and storage, vehicles sit in lots collecting rail dust, industrial fallout, and brake particles from nearby vehicles. That contamination bonds to the paint before you ever drive it off the lot. If
What's the difference between the two sides?
The Clay/Prep side has a textured surface that bonds to fine contaminants and lifts them off the paint without scratching, leaving surfaces feeling genuinely glass-smooth. The Bug Mesh side is designed to cut through heavier residue like bug splatter
What products do I pair it with?
RESMOOTH works with three MAXL products depending on how much decontamination you need.1) Use it with MAXRemove for the most aggressive decontamination — best for iron deposits, heavy bug buildup, water spots, and tough stains.2) Use it with MAXWash
What happens if I drop the towel on the ground?
Unlike a clay bar, RESMOOTH can be rinsed clean. If you drop it, pick it up, rinse it thoroughly under running water until the grit is flushed out, and inspect the surface before continuing. Don't use it again until you've confirmed no debris is embe
Is it safe to use on a car with PPF?
Yes, with an important note: claying will strip your existing protection. After using RESMOOTH on a wrapped vehicle, you need to re-apply protection — use MAXL ONE, a sealant, or your coating's recommended maintenance product. If you're trying to mai
Can I use it on glass and wheels?
Yes. RESMOOTH is safe for paint, glass, chrome, coated metal, wheels, and gelcoat (boats and RVs). Always test on delicate or matte finishes first before using on the full surface.
Can it be used at home?
Yes — RESMOOTH works on a variety of household surfaces too, always using wet, hand-weight pressure only. It can tackle oven-door glass carbon haze, ceramic and glass cooktops, shower glass mineral and soap film, stainless steel appliances, sealed gr
How do I clean and maintain the towel?
Rinse the towel frequently during use to flush out contaminants as you go — the white fabric makes this easy since you can see the dirt. After use, machine wash it separately in warm water without fabric softener. Fabric softener can clog the fibers