MAXRemove
MAXRemove Dilution Ratios and How to Store
Initial Setup. Using the Pop Cap. Storage Instructions. Handling Temperature Swings. By following these steps, you can ensure the longevity and effectiveness of your MAX Remove product while maintaining safety and cleanliness.
MAXRemove Instructions/Directions
Apply MAXRemove to a cool surface, and do not apply in direct sunlight. (Note: Water spots must always be addressed immediately to reduce chances of etching into the surface. Once water spots have etched into the surface, the surface will have to be
Can I use MAXRemove in a foam cannon?
Short Answer:. Yes. MAXRemove works extremely well in a foam cannon. You can use a foam cannon to cover the entire vehicle quickly, lift abrasives, and loosen contaminants before you touch the paint. A dilution of 4:1 of water and MAXRemove is a grea
Can MAXRemove be used as a rinseless wash?
No. MAXRemove cannot be used as a rinseless wash. It is a powerful contamination remover built with Acidless Acid™ technology, which is designed to dissolve heavy grime, minerals, brake dust, water spots, and embedded abrasives. Because it breaks the
Will MAXRemove remove water spots?
Note: Water spots must always be addressed immediately to reduce chances of etching into the surface. Once water spots have etched into the paint or clear coat, they must be repaired with an abrasive compound. Hard water and direct sunlight are the b
How do I handle removing heavy contamination with MAXRemove?
After using MAXRemove at a 4:1 dilution and letting it dwell on the surface for at least two minutes, rinse it off completely. Then place your finger inside a smooth plastic bag and lightly glide it across a small section of the surface. If you feel
Can you remove rust with MAXRemove?
Yes, MAXRemove works very well for removing rust and rust stains. Because it uses Acidless Acid technology, it safely breaks down oxidation without damaging the surface underneath. For heavier rust buildup, you may need several treatments along with
Will MAXRemove brighten metal or remove oxidation from metal?
Yes, MAXRemove can brighten metal and remove oxidation from metal surfaces. The Acidless Acid technology inside MAXRemove reacts on contact and begins breaking down the oxidation almost immediately, so you should see results very quickly. For heavier
Can MAXRemove be used as an iron remover?
Yes, MAXRemove can be used as an iron remover. The Acidless Acid™ technology inside MAXRemove is designed to break down iron particles and other embedded contaminants that bond to the surface. If you suspect heavy iron contamination, use MAXRemove at